SBR02-MIB DEFINITIONS ::= BEGIN

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY,
    Integer32, Opaque, enterprises, Counter32
    FROM SNMPv2-SMI

    TEXTUAL-CONVENTION, DisplayString, TruthValue
	FROM SNMPv2-TC;


cityron MODULE-IDENTITY
    LAST-UPDATED "202211090000Z"
    ORGANIZATION "CITYRON"
    CONTACT-INFO
	".."
    DESCRIPTION
	"Some stuff MIB definitions."	
	REVISION	 "202211090000Z"
    DESCRIPTION
	"Some stuff MIB definitions."	
    ::= { enterprises 47777 }


products     	OBJECT IDENTIFIER ::= { cityron 1 }
sbr02      		OBJECT IDENTIFIER ::= { products 1 }
system	      	OBJECT IDENTIFIER ::= { sbr02 1 }
conditioners    OBJECT IDENTIFIER ::= { sbr02 2 }

conditioner1    OBJECT IDENTIFIER ::= { conditioners 1 }
conditioner2    OBJECT IDENTIFIER ::= { conditioners 2 }
conditioner3    OBJECT IDENTIFIER ::= { conditioners 3 }
conditioner4    OBJECT IDENTIFIER ::= { conditioners 4 }
conditioner5    OBJECT IDENTIFIER ::= { conditioners 5 }
conditioner6    OBJECT IDENTIFIER ::= { conditioners 6 }
conditioner7    OBJECT IDENTIFIER ::= { conditioners 7 }
conditioner8    OBJECT IDENTIFIER ::= { conditioners 8 }
conditioner9    OBJECT IDENTIFIER ::= { conditioners 9 }
conditioner10   OBJECT IDENTIFIER ::= { conditioners 10 }


Error OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { system 1 }
TRoom OBJECT-TYPE
    SYNTAX	Integer32 (-190..450)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Room temperature"
    ::= { system 2 }
TCondOn OBJECT-TYPE
    SYNTAX	Integer32 (100..450)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Temperature of activation of additional air conditionerss"
    ::= { system 3 }
TAlarm OBJECT-TYPE
    SYNTAX	Integer32 (100..450)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Emergency temperature"
    ::= { system 4 }
MinRunCond OBJECT-TYPE
    SYNTAX	Integer32 (1..10)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Minimum number of air conditioners in operation"
    ::= { system 5 }
TimeRotation OBJECT-TYPE
    SYNTAX	Integer32 (1..24)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Rotation time, in hours"
    ::= { system 6 }
TimeError OBJECT-TYPE
    SYNTAX	Integer32 (3..15)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Error response time, in minutes"
    ::= { system 7 }
LocalTimeSec OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"The operating time of the controller, in seconds"
    ::= { system 8 }
AllConditionerState OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"AllConditionerState"
    ::= { system 9 }
TCondOff OBJECT-TYPE
    SYNTAX	Integer32 (100..450)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"TCondOff"
    ::= { system 10 }
TempError OBJECT-TYPE
    SYNTAX	Integer32 (10..100)
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"TempError"
    ::= { system 11 }     
THeatOff OBJECT-TYPE
    SYNTAX	Integer32 (-190..450)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"THeatOff"
    ::= { system 12 }	
THeatOn OBJECT-TYPE
    SYNTAX	Integer32 (-190..450)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"THeatOn"
    ::= { system 13 }	    
SRB_ID OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"SRB_ID"
    ::= { system 20 }
SBR_FW OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (18))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"SBR_FW"
    ::= { system 21 }
HeatStateBits OBJECT-TYPE
    SYNTAX	Integer32 (0..3)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION "Status of heaters in a bit mask"
    ::= { system 22 }
--------------------------------------------------------
addr1 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 1"
    ::= { conditioner1 1 }
addr2 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 2"
    ::= { conditioner2 1 }
addr3 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 3"
    ::= { conditioner3 1 }
addr4 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 4"
    ::= { conditioner4 1 }
addr5 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 5"
    ::= { conditioner5 1 }
addr6 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 6"
    ::= { conditioner6 1 }
addr7 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 7"
    ::= { conditioner7 1 }
addr8 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 8"
    ::= { conditioner8 1 }
addr9 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 7"
    ::= { conditioner9 1 }
addr10 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Air Conditioner Number 8"
    ::= { conditioner10 1 }    
--------------------------------------------------------
errorC1 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner1 2 }
errorC2 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner2 2 }
errorC3 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner3 2 }
errorC4 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner4 2 }
errorC5 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner5 2 }
errorC6 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner6 2 }
errorC7 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner7 2 }
errorC8 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner8 2 }
errorC9 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner9 2 }
errorC10 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Error"
    ::= { conditioner10 2 }    
	
--------------------------------------------------------
tempInC1 OBJECT-TYPE
    SYNTAX	Integer32 (0..16)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner1 3 }
tempInC2 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner2 3 }
tempInC3 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner3 3 }
tempInC4 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner4 3 }
tempInC5 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner5 3 }
tempInC6 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner6 3 }
tempInC7 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner7 3 }
tempInC8 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner8 3 }
tempInC9 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner9 3 }
tempInC10 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner IN"
    ::= { conditioner10 3 }    
--------------------------------------------------------
tempOutC1 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner1 4 }
tempOutC2 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner2 4 }
tempOutC3 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner3 4 }
tempOutC4 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner4 4 }
tempOutC5 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner5 4 }
tempOutC6 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner6 4 }
tempOutC7 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner7 4 }
tempOutC8 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner8 4 }	
tempOutC9 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner9 4 }
tempOutC10 OBJECT-TYPE
    SYNTAX	Integer32 (0..32)
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Temperature at the air conditioner OUT"
    ::= { conditioner10 4 }	    
--------------------------------------------------------
stateC1 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner1 5 }
stateC2 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner2 5 }
stateC3 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner3 5 }
stateC4 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner4 5 }
stateC5 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner5 5 }
stateC6 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner6 5 }
stateC7 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner7 5 }
stateC8 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner8 5 }
stateC9 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner9 5 }
stateC10 OBJECT-TYPE
    SYNTAX	INTEGER { auto(0), cool(1), stop(3)}
    MAX-ACCESS	read-write
    STATUS	current
    DESCRIPTION
	"Condition of air conditioner"
    ::= { conditioner10 5 }    
--------------------------------------------------------
autoOnC1 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner1 6 }
autoOnC2 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner2 6 }
autoOnC3 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner3 6 }
autoOnC4 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner4 6 }
autoOnC5 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner5 6 }
autoOnC6 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner6 6 }
autoOnC7 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner7 6 }
autoOnC8 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner8 6 }
autoOnC9 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner9 6 }
autoOnC10 OBJECT-TYPE
    SYNTAX	INTEGER { auto(1), manual(0)}
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Manual / Automatic control"
    ::= { conditioner10 6 }    
--------------------------------------------------------
coolTimeC1 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner1 7 }
coolTimeC2 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec.."
    ::= { conditioner2 7 }
coolTimeC3 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner3 7 }
coolTimeC4 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner4 7 }
coolTimeC5 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner5 7 }
coolTimeC6 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner6 7 }
coolTimeC7 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner7 7 }
coolTimeC8 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner8 7 }
coolTimeC9 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner9 7 }
coolTimeC10 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner10 7 }    
--------------------------------------------------------
FW_C1 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner1 20 }
FW_C2 OBJECT-TYPE
   SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec.."
    ::= { conditioner2 20 }
FW_C3 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner3 20 }
FW_C4 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8)) 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner4 20 }
FW_C5 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner5 20 }
FW_C6 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner6 20 }
FW_C7 OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner7 20 }
FW_C8 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner8 20 }
FW_C9 OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner9 20 }
FW_C10 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (8))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Continuous operation of the air conditioner, in sec."
    ::= { conditioner10 20 }    
--------------------------------------------------------
CommunicationLevelC1 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner1 21 }
CommunicationLevelC2 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner2 21 }
CommunicationLevelC3 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner3 21 }
CommunicationLevelC4 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255)) 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner4 21 }
CommunicationLevelC5 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner5 21 }
CommunicationLevelC6 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner6 21 }
CommunicationLevelC7 OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner7 21 }
CommunicationLevelC8 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner8 21 }
CommunicationLevelC9 OBJECT-TYPE
	SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner9 21 }
CommunicationLevelC10 OBJECT-TYPE
    SYNTAX OCTET STRING (SIZE (0..255))
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Ñommunication level"
    ::= { conditioner10 21 }    
--------------------------------------------------------
OperatingTimeC1 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner1 22 }
OperatingTimeC2 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner2 22 }
OperatingTimeC3 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner3 22 }
OperatingTimeC4 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner4 22 }
OperatingTimeC5 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner5 22 }
OperatingTimeC6 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner6 22 }
OperatingTimeC7 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner7 22 }
OperatingTimeC8 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner8 22 }
OperatingTimeC9 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner9 22 }
OperatingTimeC10 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Operating time, in sec."
    ::= { conditioner10 22 }    
--------------------------------------------------------
SupplyCounterC1 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner1 23 }
SupplyCounterC2 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner2 23 }
SupplyCounterC3 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner3 23 }
SupplyCounterC4 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner4 23 }
SupplyCounterC5 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner5 23 }
SupplyCounterC6 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner6 23 }
SupplyCounterC7 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner7 23 }
SupplyCounterC8 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner8 23 }
SupplyCounterC9 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner9 23 }
SupplyCounterC10 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Supply counter"
    ::= { conditioner10 23 }    
--------------------------------------------------------
TimeOfNoConnectionC1 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner1 24 }
TimeOfNoConnectionC2 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner2 24 }
TimeOfNoConnectionC3 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner3 24 }
TimeOfNoConnectionC4 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner4 24 }
TimeOfNoConnectionC5 OBJECT-TYPE
    SYNTAX	Integer32 
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner5 24 }
TimeOfNoConnectionC6 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner6 24 }
TimeOfNoConnectionC7 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner7 24 }
TimeOfNoConnectionC8 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner8 24 }
TimeOfNoConnectionC9 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner9 24 }
TimeOfNoConnectionC10 OBJECT-TYPE
    SYNTAX	Integer32
    MAX-ACCESS	read-only
    STATUS	current
    DESCRIPTION
	"Time of no connection"
    ::= { conditioner10 24 }    
--------------------------------------------------------
END